Cleaning Scale On Oven Bottom; Descaling; Drying; Evaporation - Signature Kitchen Suite SKSDR360GS Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

68 MAINTENANCE
Cleaning Scale on Oven
Bottom
To remove mineral deposits that remain on the oven
bottom after using the steam mode, use a cloth
or sponge soaked in vinegar or a weak citric acid
solution. For more stubborn or extensive scaling, use
the Descaling function.

Descaling

Use this function to remove the white deposits that
form after the steam generator is used for a long
period.
The Descaling function runs for 69 minutes. Water
will come out of the steam generator while it is being
cleaned.
For instructions on removing and filling the steam
feeder tank, see "Using the Steam Feeder Tank."
Setting Descaling
1
Fill the steam feeder tank with a 20:1 mixture of
water and citric acid. For example, use 4 tsp of
citric acid in 4
/
cups water (20 g citric acid in
1
4
1000 ml water).
2
Insert the steam feeder tank into the slot over
the oven cavity and push it in until it clicks into
place.
3
Touch Clean, Steam Maintenance and Descaling
in that order.
4
After 58 minutes of descaling, a popup will
appear in the display. Following the instructions,
drain the tank and fill it with clean water.
5
Insert the tank and start the Rinsing function.
6
Once the Rinsing function is complete, dry the
inside of the oven with a soft cloth.
NOTE
• The Rinsing function must be completed even if
the Descaling function is canceled.
• If water remains on the oven bottom after
descaling, it can leave a residue after the
oven is used. To remove the residue, see the
instructions under "Cleaning Scale on Oven
Bottom."

Drying

The Drying function removes residual water inside
the steam generator. The function takes a little over
1 minute and runs automatically after any steam
cooking cycle. The Drying function can also be
started manually, if needed.
Setting Drying
1
Check whether there is water in the steam
feeder tank.
2
Touch Clean, Steam Maintenance and Drying in
that order.
3
Touch Start to begin Drying. The remaining time
appears in the display.

Evaporation

Use the Evaporation function to dry the oven cavity
after a steam cooking cycle. Evaporation runs for 12
minutes.
Setting Evaporation
1
Touch Clean, Steam Maintenance and
Evaporation in that order.
2
Touch Start to begin Evaporation. The remaining
time appears in the display.

Publicité

Chapitres

Table des Matières
loading

Table des Matières