Wi-Fi; Remote Start; Brightness; Display - Signature Kitchen Suite SKSDR360GS Manuel Du Propriétaire

30 OPERATION

Wi-Fi

Connect the appliance to a home Wi-Fi network to
use Remote Start and other smart functions. See the
Smart Functions section for more details.
Setting Up Wi-Fi
1
Touch Settings at the center bottom of the Main
screen, then touch Wi-Fi in the first Settings
screen.
2
Follow the instructions in the Wi-Fi Guide in the

display.

3
Select ON, OFF, or RESET and touch OK.
4
If ON is selected, the Wi-Fi icon
the top of the display.
5
Selecting RESET initializes the IP address.

Remote Start

Remotely starts or stops the preheating function of
the appliance. The appliance must be registered on a
home Wi-Fi network to use Remote Start.
Setting Remote Start
1
Touch Settings at the center bottom of the Main
screen, then touch Remote Start in the first
Settings screen.
2
Select On or Off and touch OK.
3
If ON is selected, the Remote Start icon
appears at the top of the display.

Brightness

Adjust the brightness of the LCD display from 20% to
100% in increments of 20%.
Setting Display Brightness
1
Touch Settings at the center bottom of the Main
screen, swipe to the second Settings screen,
and touch Brightness.
2
Adjust the display brightness by touching and
dragging the dot across the bar, by tapping
anywhere on the bar, or by touching + or –.
3
Touch OK.
Display
Set the length of time before the display sleeps.
There are two options you can select.
• 30 MINS ON : Automatically turns off if idle for 30
minutes.
• NIGHT-TIME OFF : Turns display off from 10:00
PM to 5:00 AM.
Setting Display Option
1
Touch Settings at the center bottom of the Main
screen, swipe to the second Settings screen,
and touch Display.
2
appears at Select the desired option.
3
Touch OK.
NOTE
If the display is set to OFF, it will turn off after 30
minutes if idle. The display cannot be used in
idle mode. Touch the LCD display to activate the
screen.

Convection Auto Conversion

There is no need to remember to convert standard
recipe temperatures for convection cooking.
Convection Auto Conversion automatically subtracts
25 °F / 14 °C from the set temperature when a
convection cooking mode is selected. The converted
temperature appears in the display once preheating
is finished.
For example, select Convection Bake and enter 350
°F. The temperature will auto-convert to 325°F and
display the converted temperature.
Convection Auto Conversion is turned ON by default.
Turning Convection Auto Conversion On/Off
1
Touch Settings at the center bottom of the Main
screen, swipe to the second Settings screen,
and touch Convection Auto Conversion.
2
Select ON or OFF.
3
When Convection Auto Conversion is ON, the
icon
NOTE
If Convection Auto Conversion is ON, the icon
flashes in the display while cooking in a
convection mode.
appears at the top of the display.