Table des Matières
Publicité
Pièces jointes
A.2 Accessoires
• The following secondary output circuits are supplied by a Limited Power Source: 24 Vdc
output.
• The following output terminals were referenced to earth during performance testing:
Terminal P4 (-) during DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE
MEASUREMENT TEST.
• The maximum investigated branch circuit rating is: 20 A
• The investigated Pollution Degree is: 2
• Proper bonding to the end-product main protective earthing termination is: Required
• An investigation of the protective bonding terminals has: Been conducted
• The following input terminals/connectors must be connected to the end-product supply
neutral:
Please see chapter "AUTOHOTSPOT".
• The equipment is suitable for direct connection to: AC mains supply
• Output is supplied by circuit that complies with NEC Class 2 requirements (additional
evaluation acc. UL1310 has been conducted during the product investigation).
A.2.2
Supports de transpondeur
Tableau A-10 Vue d'ensemble des supports et entretoises de transpondeur
Photo du produit
6GT2190-0AA00
6GT2190-0AB00
454
transpondeurs utilisables
•
MDS D100
•
MDS D200
•
MDS D400
•
MDS E600
•
MDS E611
•
RF360T
•
MDS D100
•
MDS D200
•
MDS D400
•
MDS E600
•
MDS E611
•
RF360T
Caractéristiques
•
Entretoise pour la fixation sur du métal en liaison avec
la pochette de fixation 6GT2190-0AB00
•
Distance du transpondeur au métal : 25 mm
•
Fixation : 4 vis M4
•
Matériau : PA6
•
Poids : 31 g
•
Dimensions (L x l x H) : 110 x 62 x 24 mm
•
Pochette de fixation en relation avec l'entretoise
6GT2190-0AA00
•
Fixation :
– Enclipsage sur entretoise
– 2 vis/clous
– Agrafage
•
Matériau : PA6
•
Poids : 12 g
•
Dimensions (L x l x H) : 121 x 57 x 5 mm
Manuel système, 02/2021, C79000-G8977-C345-09
SIMATIC RF300
Publicité
Table des Matières
