Ingersoll Rand R30 Information De Produit page 19

93014.15.06
The controller will display all screens in the selected language and only one
language can be selected at a time.
Each language appears in its native translation.
Page 1: Units of Measure Settings
Figure 24 : Units of Measure Settings
The following compressors of measure settings are displayed in this section.
Table 12 : Units of Measure Settings
Display Text Description
Temperature
Pressure
Power
Page 3: Home Page Selection
Figure 25 : Home Page Selection
Table 13 : Home Page Selection
Display Text Description
Auto Return to Enables the controller to return the display back to the
Home selected Home Page if there is no user activity for the
Delay Time shown. This is only enabled when an "x"
appears in the checkbox.
Delay Time Determines how many seconds of inactivity it will take
before the controller will return to the Home Page.
Select Home Used to select the Home folder.
Folder
Select Home Used to select the Home Page within the selected Home
Page folder.
80447162 Rev B
Selectable between °F and °C.
Selectable among psi, kpa, bar, kg/cm2.
Selectable between kW and HP.
Pages 4-5: Time & Date Settings
Figure 26 : Time & Date Settings
All items are adjustable.
The following settings are displayed in this section:
Table 14 : Time & Date Settings
Display Text Description
Hours Allows the current hour to be set. The hours format is
fi xed on 24-hour.
Minutes Allows current minutes to be set.
Seconds Allows current seconds to be set.
Year Allows current year to be set.
Month Allows current month to be set.
Day Allows current day to be set.
Date Format Selectable between dd/mm/yyyy (default) and mm/dd/
yyyy.
Confi rm New Used to verify that changes to selections are desired. An
Time and Date "x" must appear in the checkbox before any changes will
take aff ect.
The controller will continue to display any changes, even when the selections
have not been confi rmed and the user exits the page, then returns. Cycling of
the power returns all selections to their current settings.
The controller does not support Daylight Savings Time.
Page 6: Backlight Settings
Figure 27 : Backlight Settings
The following settings are displayed in this section:
NOTICE
EN
EN-19