RHOSS TCAEBY 269 Mode D'emploi page 82

EN
Checking the water connections
Have the water connections been made to a professional standard?
Is the water inlet/outlet direction correct?
Are the circuits full of water and have the pipes been bled of any air
Do the pumps turn in the right direction?
ry unit in good working order and correctly installed?
The water connections are compliant
Electrical connections
Does the unit power supply match the values indicated on the plate?
Is the phase sequence correct?
Does the earth conform with current regulations?
Are the power circuit electric conductors of the size indicated in the
Is the circuit breaker positioned upstream from the unit of the right
The electric connection is compliant
Section II :: Installation and maintenance
START
YES
YES
residue?
YES
YES
YES
YES
YES
START
YES
YES
YES
manual?
YES
size?
YES
Bring the connections up to standard
NO
NO Correct the inlet/outlet direction
NO
Fill the circuits and/or bleed the air
NO
NO
NO Repair or replace the component
-
NO
Repair or replace the component
NO
Restore the correct power supply
NO
Restore the correct phase sequence
!
NO
Danger! Restore the earth connection!
!
NO
Danger! Replace the cables immediately!
!
NO
Danger! Replace the component immediately!
82
Correct the rotation direction