Axonics 2501 Manuel page 39

Connecting to a Stimulator
To connect to one of the "Additional Devices", press the device
2
name to select a device. Press "Connect" when it appears to
the right of the Patient ID ( 1 ) to connect to the device. The CP
will display a prompt with a progress indicator as it connects to
the patient device. The CP will automatically open the Patient
1 Device screen when connected to the selected device.
Note: The list of available devices can be updated by pressing the "Scan
Again" button ( 2 ). Move closer to the targeted device to increase the
likelihood that the CP finds the device.
35