Programming The Stimulator - Axonics 2501 Manuel

Programming the Stimulator

The CP can connect to a patient's external Axonics Trial
Stimulator (Model 1601) to check the status of the device and
program the device. This section explains how to:
Connect to a Stimulator
•
Set-up a new Stimulator
1
•
View Stimulator status
•
Resetting the Stimulator
•
Program a Stimulator's stimulation settings
•
Connect to a Stimulator
There are two ways to access the CP screen that connects to a
Stimulator:
From the Home screen, press "Connect to Patient Device" ( 1 ).
After implanting a tined lead, press "Connect to Patient Device"
on the Define Thresholds or PNE Lead Placement screen.
33 33