Before Using The Appliance; Description Of Buttons - Unold 48891 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35

BEFORE USING THE APPLIANCE

1.
Before taking your ice cream
maker into operation for the first
time, we recommend to rinse
all removable parts – except the
compressor casing (4) – in warm
water.

DESCRIPTION OF BUTTONS

Time +
Menu
Power
(On/Off)
Button "Time +"
This button extends the time in 1-minute-steps. When you keep pressing this
button, the time passes continuously.
Button "Time –"
This button shortens the time in 1-minute-steps. When you keep pressing this
button, the time passes continuously. The minimum time for preparation is 5
minutes. It is not possible to set the preparation time to less than 5 minutes.
Button "Start/Break" (Start/Pause)
This button starts the chosen programme. It is possible to interrupt the pro-
grammes by pressing this button as well. When you interrupt the programme, the
preselected time is interrupted as well. As soon as you press the button START/
BREAK, the appliance will restart. Advice: If the preparation procedure does not
2.
Wipe the casing and slot for the
ice cream bowl with a damp, well-
wrung cloth.
3.
Place the appliance on a dry, level
work surface.
Button "Power"
When the plug is in the power socket,
the appliance is in the stand-by-mo-
de. The display shows "00". Press the
button in order to turn on the appli-
ance. The display lights up and shows
"00:00". In order to turn off the appli-
Time -
ance during operation, press this but-
ton as well.
Start/Pause
Button "Menu"
With this button, you choose between
the three preparation programmes
"Mix & Freeze", "Freeze" or only
"Mix". When you press this button du-
ring operation, the appliance returns to
the initial mode.
Copyright UNOLD AG | www.unold.de
25

Publicité

Table des Matières
loading

Table des Matières