Before Using The Appliance For The First Time; Preparing Popcorn - Unold CLASSIC Notice D'utilisation

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

1. Remove all packaging materials
and any transport safeguards.
Keep children away from the
packaging materials due to the
danger of suffocation.

PREPARING POPCORN

Caution: For safety reasons, do not under any circumstances add oil, butter or
other greases or other ingredients to the corn kernels!
Only use customary, dry popcorn kernels without other additives, such as salt,
sugar or grease. Do not use microwave popcorn.
The maximum fill quantity per batch is 100 g of corn kernels. Do not overfill the
appliance, if you do so the corn kernels on the bottom can scorch and smoke
can form.
Ensure that you use a sufficient quantity of corn kernels, if you do not fewer
kernels will pop and there will be more hard corn kernels among the popcorn.
Do not switch the appliance on if no popcorn has been filled.
1. Check to make sure that the appli-
ance is stable; maintain an ade-
quate distance to other objects.
2. Take the measuring cup out of the
lid of the appliance and fill it half
full (max. 100 g) with dry, fresh
corn kernels.
measuring cup full of corn kernels
into the popcorn chamber. If you
use too much corn the appliance
3. Fill the corn
into the popcorn
chamber on the
motor block,
through the ope-
ning in the lid.
4. At the maxi-
mum, fill one
Copyright UNOLD AG | www.unold.de
2. Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
3. Check to make sure that the appli-
ance is stable.
can clog and it is possible that the
appliance can be damaged.
5. For safety reasons, do not add oil,
butter or other greases or other
ingredients to the corn kernels.
6. Seal the opening in the lid by tur-
ning the measuring cup upside
down and placing it on the lid.
Ensure that the lid is tightly
sealed.
7. Place a sufficiently large, heat-
resistant bowl under the popcorn
discharge. We recommend that
you not use metal bowls because
they can become extremely hot.
8. Connect the appliance to the
mains network
50/60 Hz).
(220–240 V~,
17