Before Using The Appliance For The First Time; Preparing Popcorn - Unold 48525 Notice D'utilisation

use conventional, dry corn ker-
nels.
cautIoN:
the appliance is very hot duri-
ng and after operation!
the manufacturer will not be liable in the event of incorrect assembly, improper or
incorrect use or if repairs are carried out by unauthorized third parties.

beFore using the aPPliance For the First time

1. Remove all packaging materials
and any transport safeguards.
Keep children away from the
packaging materials due to the
danger of suffocation.

PreParing PoPcorn

Caution: For safety reasons, do not under any circumstances add oil, butter or
other greases or other ingredients to the corn kernels!
Only use customary, dry popcorn kernels without other additives, such as salt,
sugar or grease. Do not use microwave popcorn.
The maximum fill quantity per batch is 100 g of corn kernels. Do not overfill the
appliance, if you do so the corn kernels on the bottom can scorch and smoke
can form.
Ensure that you use a sufficient quantity of corn kernels, if you do not fewer
kernels will pop and there will be more hard corn kernels among the popcorn.
Do not switch the appliance on if no popcorn has been filled.
1. Check to make sure that the appli-
ance is stable; maintain an ade-
quate distance to other objects.
2. Take the measuring cup out of the
lid of the appliance and fill it half
full (max. 100 g) with dry, fresh
corn kernels.
3. Fill the corn into the popcorn
chamber on the motor block,
through the opening in the lid.
4. At the maxi-
mum, fill one
measuring cup
full of corn ker-
nels into the
popcorn cham-
ber. If you use
too much corn
the appliance
can clog and it
Never open the housing of the
appliance. this can result in
electric shock.
2. Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
3. Check to make sure that the appli-
ance is stable.
is possible that the appliance can
be damaged.
5. For safety reasons, do not add oil,
butter or other greases or other
ingredients to the corn kernels.
6. Seal the opening in the lid by tur-
ning the measuring cup upside
down and placing it on the lid.
Ensure that the lid is tightly
sealed.
7. Place a sufficiently large, heat-
resistant bowl under the popcorn
discharge. We recommend that
you not use metal bowls because
they can become extremely hot.
8. Connect the appliance to the
mains network
50/60 Hz).
9. Switch on the appliance via the
On/Off switch.
(220-240 V~,
15