Before Using The Appliance; Operation - Unold METALL PLUS Notice D'utilisation

DE

BEFORE USING THE APPLIANCE

EN
1. Remove all packaging materials and any transport safety devices. Keep
packaging materials away from children - danger of suffocation! Check, if
FR
all parts are complete.
NL
2. Before using the appliance for the first time, wipe it with a damp cloth (see
chapter Cleaning)
IT
3. Place the slicer on a flat, clean, solid, and
dry surface.
ES
4. Insert the carriage into the guide.
PL
5. Then push it down on the left side until it
clicks in.
6. Place the rest holder on the carriage.
7. Place the dish from the left side under the
carriage.
8. Put the plug into a power socket as per rating label.
9. Adjust the desired cutting thickness from 0-23 mm by turning the wheel.

OPERATION

1. Place the food to be sliced on the carriage and press it slightly against the
rebate plate. The food must not contain any bones or other hard compo-
nents.
2. The appliance offers an instant operation and a permanent operation.
3. Instant operation
Just press the switch downwards to I. The motor starts running and stops
immediately as soon as you release the switch.
20 von 52
Copyright UNOLD AG | www.unold.de
Stand 10.3.2020