Before Using The Appliance; Operation - Unold 78856 Notice D'utilisation

the food is small enough to place the rest
holder.
21. Always use the rest holder for slicing of
small pieces of food.
22. The appliance must not be used for any
other than the provided purpose. Only use it
for cutting food, that does not contain bones
or any other hard parts.
23. After use of the slicer and before cleaning
it, pull the plug out of the socket and adjust
the cutting width to 0.
24. Please avoid any contact between the
power cord and the knife or any other sharp
edges.
25. The knife is very sharp, be very cautious
when cleaning it!
26. Inexpert handling and repairs may entail
serious risks to the user. Repairs should only
be performed by our after sales service.
27. The slicer is provided for domestic use and
is not suitable for commercial use. Only use
it for slicing household quantities.
28. Do not use the appliance with accessories
of other manufacturers or brands, to prevent
damage.
the manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEfoRE uSINg tHE AppLIANCE

1. Remove all packaging materials and check,
if all parts are complete.
2. Before using the appliance for the first
time, wipe it with a damp cloth (see chapter
Cleaning)
3. Place the slicer on a flat, clean, solid, and
dry surface.
4. Mount both parts of the carriage.
5. Insert the carriage into the guide. Hold it at
a right angle and then tilt it downward.

opERAtIoN

1. Place the food to be sliced on the carriage
and press it slightly against the rebate plate.
The food must not contain any bones or
other hard components.
2. The appliance disposes of a safety lock.
Press simultaneously the unlocking device
button and the ON/OFF button. The motor
starts and you can start slicing.
3. Push the carriage slowly against the rotating
knife.
4. As soon as there is only a small part of food
left, you have to use the rest holder to avoid
12
All manuals and user guides at all-guides.com
29. Disconnect the appliance from the wall
socket after use and prior to cleaning. Never
leave the appliance unattended when it is
connected to the wall socket.
30. Never open the casing of the slicer. There is
danger of electric shock.
31. Check the appliance, the wall socket and
the lead cable regularly for wear or damage.
In case the lead cable or other parts appear
damaged, please send the appliance or the
base to our after sales service for inspection
and repair (for address, see warranty terms).
Unauthorised repairs can constitute serious
risks for the user and void the warranty.
caution! the knife is very sharp, risk
of injuries!
6. Place the rest holder on the carriage and
the food tray from the left side under the
carriage.
7. Put the plug into a power socket as per
rating label.
8. Adjust the desired cutting thickness from
0-15 mm by turning the wheel.
injuries. The appliance must not be used
without carriage and rest holder.
5. The knife rotates as long as both buttons
are pressed down. Release both switches to
stop the machine and wait until the knife
has stopped rotating.
6. When you have finished, adjust the thickness
to „0".
7. Please clean the appliance and in particular
the knife immediately after cutting fat food
(e.g. cold meat, cheese etc.)