Connecting Lead Wire; Preparing For Session - TensCare Unicare Mode D'emploi

Do not connect the pack to an
electrical outlet.
Keep batteries out of the reach of
children to prevent them from
swallowing them by mistake. If
swallowed by child, contact your
healthcare
immediately.
Battery Caution
Caution: Do NOT use in a location
where there is a large amount of
static electricity,
safety devices in the battery pack
may be compromised.
Caution: If the battery pack creates
an odour, generates heat, becomes
discoloured or deformed, or in any
way appear abnormal during use,
recharging or storage, immediately
remove it from the device or battery
charge and stop using it.
Caution: If battery leakage occurs
and comes in contact with the skin
or eyes, wash thoroughly with lots of
water and immediately
medical attention
If necessary,
replacement battery please send
the device to Tenscare. (See back
cover for contact details)
Disposal: Always dispose of batteries
and device responsibly according
to local government guidelines. Do
not throw batteries onto a fire. Risk of
explosion.
professional
otherwise, the
seek
to obtain a

14.2. CONNECTING LEAD WIRE

Insert the lead wire plug into the
base of the unit.
Connect the lead from the base of
the unit to the lead in the probe.
Push the pin ends firmly into the
pigtail ends of the probe lead.
The lead wires may be damaged by
rough handling and should be
treated with care.
Lead wire colour coding.
The ends of the lead wire are
coloured black or red. This coding is
provided for some professional uses.
For most purposes, the orientation
makes no difference, and you can
ignore this colour coding.

14.3. PREPARING FOR SESSION

1) Before using Unicare you will need
to urinate.
2) Lubricate the metal electrode
surfaces and probe tip with a
water-based lubricant, such as
TensCare Go Gel or water.
28