Activating Installed Functions - Alde Compact 3020 Instructions D'utilisation

2.12 ACTIVATING INSTALLED FUNCTIONS

The first time you use the heating system, check that the right accessories/functions are activated.
This also applies when you supplement the heating system with accessories/functions.
Activate accessories/functions by pressing the installed accessories, (see fig. A) and ticking the respective function/
accessory to activate.
Settings
A.
Inst Acc
Third party Panel
Load Monitor
Booster
B.
The respective box should be ticked if you have:
Connected an external panel.
Connecting load monitor.
Connected a Booster.
Connected a 12V pump to the floor heating.
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle manufacturer's
24
instructions.
Inst Acc
Underfloor Heat Pump
Alde Flow
Engine Pre-Heat Pump
C.
Connect an Alde Flow* to increase the hot water
capacity.
If an Alde Flow*
(Art. No. 3020 163)
the panel is in extra hot water mode, up to 1
gallon (3.78 litres)/minute of hot water can be
supplied.
Connected a 12 V pump for heating the
vehicle's engine through the heating system.
is installed and