Service Menu & Reset - Alde Compact 3020 Instructions D'utilisation

2.10 SERVICE MENU & RESET
• SERVICE MENU
The Service menu is accessed by pressing Service (see figure A) The function shows the readings from the heating
system on the screen (figure B and C). The readings are updated once a second.
Settings
A.
• RESET
The panel can be reset to its factory settings by pressing Reset. After resetting, the panel will be set as follows:
Boiler – Off mode
Electrical operation – 1 kW
LP Gas heating – On mode
Interior temperature – 72 °F/22 °C
Hot water – In normal mode
Other functions are switched off.
The functions that are checked under Installed functions (see chapter 2.12) will not be affected by Reset.
Settings
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle manufacturer's
22
instructions.
Service
Glycol Temp: 176° F
Water Temp: 131° F
Fan rotation: 0RPM
Current: 0.0A
Overheat: Deact
B.
Service
PCB Temp: 68° F
Ext Switch: deact
Boiler: XXXX
Panel: XXXX
12VBat 12.2 V
C.