GOLDSCHMIDT GP 4000 Notice D'utilisation page 8

PROFILE GRINDER GP 4000
General notes for the manual
This operating manual and the maintenance manual include
all the information necessary for use in the intended manner
and for the professional inspection and maintenance of the
GP 4000 Profile Grinder.
The following must be observed:
– The operating manual and the maintenance manual are
a part of the GP 4000 Profile Grinder.
– The manuals must be stored close to the machine for the
complete life of the machine.
– The manuals must be passed on to other operators of
the machine and complemented with content specific to
the operator.
– The operating manual must always be available to the
user and maintenance personnel.
– The maintenance manual must always be available to
the maintenance personnel.
– The GP 4000 Profile Grinder is available in 2 product
variations:
» GP 4000 D (with diesel engine)
» GP 4000 P (with petrol engine)
NOTE
NOTE
8
OPERATING MANUAL
This operating manual describes
two product variations. The re-
spective product variations can be
determined by the identification
plate (see Chapter "Product iden-
tification – identification plate"
on page 9). If the content of this
operating manual only affects one
product variation, this is clearly
described in the text. Figures may
differ from your product.
This operating manual represents
the main document required to
use the machine. At some posi-
tions in the document reference
is made to further information in
the maintenance manual. The
information in the maintenance
manual is exclusively reserved
for the maintenance personnel.
See Chapter 1.7 "Qualification of
personnel" on page 14.
Using the operating manual
The information contained in this operating
manual and maintenance manual is binding.
Each person who carries out work on the
machine or has other contact with the machine
must have read and understood the operating manual
beforehand. The instructions, rules and prohibitions of the
operating manual must always be observed and all safety
instructions must be observed.
Copyright
This operating manual is protected by the copyright of
Goldschmidt Thermit GmbH. Reproduction of the document
in part or in whole and / or transfer to a third party is only
permitted with the prior written approval of Goldschmidt
Thermit GmbH.
Use of trademarks
The names of companies and products used in this document
may be registered trademarks of the respective owner.
Warranty
Warranty obligations are valid as required by law. Damage
caused by wear through use of the machine is excluded from
the warranty.
The Goldschmidt Thermit GmbH accepts no responsibility,
does not give a warranty and releases itself from possible
third party claims if injuries to persons and damage to prop-
erty are the result of one or more of the following causes by
the operator or a third party:
– improper use of the machine,
– non-observance of the instructions of this operating
manual or the maintenance manual,
– non-observance of the stipulated application limits and
conditions,
– improper commissioning, operation, inspection or main-
tenance of the machine,
– non-observance of the stipulated inspection and
maintenance intervals,
– modifications to the machine or individual components
which are not expressly approved by Goldschmidt
Thermit GmbH, or
– use of unapproved accessories or unapproved spare parts.