Carrying Out Transport - GOLDSCHMIDT GP 4000 Notice D'utilisation

PROFILE GRINDER GP 4000
5.2

Carrying out transport

DANGER
DANGER
WARNING
CAUTION
20
OPERATING MANUAL
Risk of fire.
After operation the engine can
be very hot. If the hot engine
comes into contact with highly
flammable materials, e.g. on
a loading surface, there is the
risk of a fire and serious injuries
caused by fire can be fatal.
– Before loading or storing allow
the engine to sufficiently cool.
– Do not place any highly
flammable materials close to
the machine.
Risk of injury.
If the machine is moved with
a means of transport and the
machine falls down, this can lead
to serious injuries which can be
fatal.
– Always secure the machine
adequately before the transpor-
tation.
– Never stand under a suspended
load.
Danger of crushing.
The machine has sharp edges
and can fall over. If the machine
falls on the hands or feet, this can
result in contusions, fractures or
to the separation of body parts on
the hands and feet.
– Always park the machine so
that it cannot fall over.
– Always wear protective gloves,
shoes with steel toecaps and
protective clothing during trans-
port of the machine.
Danger of burns.
After operation the engine can be
very hot. Contact with the engine
can lead to skin burns.
– Avoid contact with the engine
shortly after operation.
– Always wear protective gloves
and protective clothing during
transport of the machine.
Observe the following points to correctly transport the
machine manually:
– Only carry the machine with two people.
– Only transport the machine manually as is absolutely
necessary.
– Only use the carrying fixtures on the machine.
– Only transport and park the machine in a vertical
position to prevent operational liquids escaping from
the engine.
– Always act cautiously when letting the machine down to
avoid damage to the guide system.
Observe the following points to correctly transport the
machine with the appropriate means of transport:
– Secure the machine adequately against falling down.
– Clear the transport path for the machine and ensure
that no person can be injured.
– As fastening points only use the carrying fixtures located
on the machine.
– Only transport and park the machine in a vertical
position to prevent operational liquids escaping from
the engine.
– Always act cautiously when letting the machine down to
avoid damage to the guide system.
Observe the following points to transport the machine on a
loading platform:
– Fix the machine using transportation belts attached to
the carrying fixtures so that the machine cannot fall or
be damaged and is in a vertical position.
– Ensure that the engine and the controls are not damaged
by other objects in the process of transport and ensure
the transportation belts are not damaged.