Operation; Operating And Adjustment Controls - GOLDSCHMIDT GP 4000 Notice D'utilisation

6

Operation

This chapter includes all the necessary infor-
mation to correctly operate the machine. Care-
fully read and observe all the instructions about
the operation in order to ensure a long life
for the machine.
6.1

Operating and adjustment controls

Both product variations
The following operating and adjustment controls are located
on both product variations of the machine:
Figure 12: Operating and adjustment controls 1
Figure 13: Operating and adjustment controls 2
Figure 14: Operating and adjustment controls 3
Control element Function
Operating frame For the operator to hold the
machine during operation
and to guide the machine
on the rail in a left / right
movement.
Inclination To adjust the inclination of
adjustment the machine and the grind-
stone relative to the rail head.
Side stand To park the machine at the
(optional part,
workplace, e.g. for breaks
not standard) or other interruptions to the
work.
Handwheel for To adjust the height of the
grindstone height grindstone.
adjustment
Handwheel lock To fix the height adjustment
of the grindstone.
Guide disc
To hold the machine on
the rail.
Spacer discs To adjust the gap between
the guide rollers. Spacer discs
enable use of the machine on
different rail head widths.
To roll the machine on the
Rollers
rail.
21