Resonance R16M Mode D'emploi page 94

Press the SETUP icon (see adjacent image) to return to the test execution page.
Press the START icon (see adjacent image) to start the exam.
After the test finishes, it is possible to change sides, run a contralateral test, repeat or end the session.
The results can be viewed on a larger scale by pressing and holding a graph for 2 seconds. If selected
in the setup menu, the slope of the rising and falling edge of the reflex in ml/sec will be displayed, too.
Pressing the EXIT button, a dialog box will pop up and ask if you wish to save and/or print
the test out on the thermal printer.
Select the appropriate button. The R16M will show the database from where you can select
the patient to assign the result to.
2. Various indicators
Indicates probe status. The icon will read either: probe open; probe closed; ready;
autorun.
Indicates Real-time Compliance value read by the probe
Indicates the Real-time Pressure value read by the probe.
R16M User's Manual – Page 94