Print Management; Data Transmission To Pc - Resonance R16M Mode D'emploi

Multiple test elimination: if you wish to delete multiple tests belonging to the same patient, select the
patient, keep the first test you wish to delete pressed for a few seconds and until it turns orange, then
add the other tests you wish to delete by touching them shortly. When all the selected tests will turn
orange, you will be able to delete them all by pressing DELETE. The action can be aborted by pressing
the Exit button.
Patient data editing. Pressing the EDIT icon allows data editing for the selected patient.
Test results display. Press the VIEW icon (see adjacent image) to display a specific test
result for the selected patient.
Patient activation. Press the icon shown on the left to activate the selected patient. The
selected patient's name will be displayed on the top left of the display once you enter one
of the pages that allow the tests execution. Tests that have been performed will be saved
to the associated patient.

7. Print management

The test results can be printed through the PC Suite Resonance MDS, or directly from the unit to the
optional portable wireless printer.
To print out via the MDS, Transfer the data from the device to the PC Suite Resonance MDS and then
follow the instructions related to the "Session report" MDS function.
If you wish to print directly from the unit, switch the printer on and insert the Wi-Fi dongle in the R16M
USB port. Please note that the two devices require 20-30 seconds to connect.
Once unit and printer are connected, enter the patient database menu, select the test you
wish to print out and press the PRINT icon you will see on the display. It is possible to print
report during the text exit by pressing the print button on the pup up menu.
The wireless printer uses the 2.4 GHz Wi-Fi technology. Using it in areas where too many
Wi-Fi networks, or other sources of electromagnetic interference such as mobile phones
or other similar devices can be found, can provoke malfunctions.

8. Data transmission to PC

Data transfer from the device to PC is possible via Bluetooth connection.
To transfer test results stored within the R17A and subsequently view, edit, print or store them in a
NOAH database, the PC suite Resonance MDS must be installed on to a computer. The installation file
named MRS Resonance Setup.exe is supplied on the USB pen-drive which includes this operating
manual.
Refer to the installation & operating instructions provided with the PC suite Resonance MDS for
further details.
How to associate R16M to PC via Bluetooth
1. Activate the Bluetooth connection on the device by pressing Bluetooth button present in
the General Setup page (see section 5.1 of this manual).
2. Make sure the Bluetooth data transmission is active on your PC.
3. Open Windows settings on PC.
Select the Devices icon.
4.
R16M User's Manual – Page 124