Publicité
Les langues disponibles
Les langues disponibles
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL
NAME
Safety Alert
Read The Operator's
Manual
Tri-Arc blade
Do not use toothed blade
RPM Decal
Boots
Gloves
No Smoking
Petrol
Oil
Mix Petrol and Oil
English (Original instructions)
SYMBOLS
DESIGNATION/EXPLANATION
Indicates danger, warning or caution. It means attention! Your
safety is involved.
Read the operation manual and follow all warnings and safety
instructions.
Danger of Ricochet. Keep all bystanders (especially children
and pets) at least 15m away from the work area.
Tri-Arc blade is appropriate for this unit and is suited for cutting
pulpy weeds and vines.
This unit is not intended for use with a toothed saw type blade.
Rotational direction and maximum speed of the shaft for the
cutting attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or lling fuel tank.
Use unleaded petrol intended for motor vehicle use with an octane
rarting of 91([R+M]/2) or higher.
Use 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling.
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
Wear eye, hearing and head protection when operating this
equipment.
Guaranteed sound power level is 109 dB.
Continued movement of saw blade after cutting through log.
GOST-R conformity
12
Publicité
