Indications For Connecting To The Mains, Switching On The Device And Usb Connection - Tecno-gaz MasterFlux Smart Mode D'emploi

6.3 INDICATIONS FOR CONNECTING TO THE MAINS, SWITCHING ON THE DEVICE AND
USB CONNECTION
1 - The mains cable must be connected on the right-hand side of the device. The socket (1) has two
protective fuses.
2 - Above the socket there is the switch (2) which starts the device.
3 - At the top near the handle there is the USB socket - the USB socket allows to download the reports of
the sedations performed and if necessary to update the firmware of the device.
The USB socket when not in use:
Must be protected by the plastic cover provided.
Beware of electrostatic discharges that the operator may generate.
The single-pole switch does not allow the device to be disconnected from the
mains.
TO DISCONNECT THE DEVICE FROM THE MAINS, THE POWER CABLE MUST
BE UNPLUGGED.
2
1
23 - 33
ENGLISH