Components; Components Supplied - Tecno-gaz MasterFlux Smart Mode D'emploi

5

COMPONENTS

The device consists of a cabinet with 4 swivel wheels with brakes.
At the top of the front is the control panel, which is tilted for easy reading.
Underneath the control panel there is the delivery block, where the tubes of the gas delivery circuit are
connected to the patient and where the anaesthesia bag is connected, this space can be used for storing
the accessories.
At the rear there is a storage area designed to accommodate two cylinders with a closing door.
On the right side, there is a handle at the top for moving the device.
At the bottom there are connectors for ACTIVE and PASSIVE discharge of EXHALED GASES.
On the left side, there is a handle for moving the device and a USB socket.
At the bottom, there is a main switch and a plug for connecting the device to the power supply.
Inside the device there is a battery that allows the use of the device even without connection to the
mains.
5.1

COMPONENTS SUPPLIED

ITEM
MF001IMF
Master Flux Smart
with Reducers with
UNI Oxygen and
Nitrogen Oxide
connections
MF002IMF
Master Flux Smart
with Reducers with
AFNOR Oxygen
and Nitrogen Oxide
connections
MF003IMF
Master Flux Smart
with Reducers with
DIN Oxygen and
Nitrogen Oxide
connections
MF004IMF
Master Flux Smart
without reducers kit
ACCESSORIES
KIT REDUCER
2IMFA0030 MF011ZMF
2IMFA0051 MK005ZMF
2IMFA0052 MF011ZMF
2IMFA0053
N 0 0
2 2
REDUCER
MF847ZMF
MK012ZMF
MF845ZMF
- -
13 - 33
CIRCUITS AND MASKS
SUPPLIED
MF820ZMF Administration
circuit
MF800IMF Active discharge
circuit
SMFA197 Passive discharge
circuit
MF835ZMF Intelliflux 1
MF836ZMF Intelliflux 2
MF837ZMF Intelliflux 3
ENGLISH