Use And Maintenance; Technical Features; Technical Data - Tecno-gaz SafetySpot Manuel De L'utilisateur

ENGLISH

Technical features

- Vortexes and delivery regulator in hostafon.
- Tank in corrosion-proof polythene.
- Silicone type delivery and suction lift pipes.
- Structure with double insulation against short circuits.
- Switch directly mounted on the molar casing.
- 5 m cable with current tap supplied.
- Delivery regulation valve.
- "CE" symbol.

Technical data

- Motor: universal 220 V, 50 Hz. Others are available on request voltages
and frequencies (100 V, 50/60 Hz; 110 V, 50 Hz; 120 V, 60 Hz).
- Power: 1.000 W.
- Tank capacity: 5 I.
- Empty weight: 3,5 Kg.
- Dimensions: 29 (I) x 43 (h) x 26 (p) cm.
- Delivery: 15 I / hour max. (with product density 1).
- Nebulization density: 5 I. enough to saturate a volume of 4.500 m3.
- Acoustic intensity: 69 dB.
Warnings
 lnstall a circuit breaker switch in the current socket used with the sprayer.
 Check that the cable is not put under tension during work. The electrical connection must be made in
such a way as to prevent people and machinery from damaging the cable, putting themselves and the
operator in danger.
 Avoid using the nebulizer with a wet floor.
 Do not use the nebulizer simultaneously with other electrically powered tools in the same room.
 Always keep the engine ventilation clean and clear.
 Disconnect the power during maintenance operations.
 Carefully follow the instructions for use and the warnings specified for each liquid used in the nebulizer,
paying particular attention to irritating and, in any case, dangerous and harmful to health liquids.
 Do not lie down or turn the nebulizer upside down as liquid may leak or short circuit.
 Do not use against wind or forced ventilation.
 Keep away from heat sources.
 Keep out of the reach of children.
Note:
the drops of liquid thai farm on the equipment after use are due to the normai bleeding of the machine
itself.
Use and maintenance