Fortress Building Products PURE VIEW Instructions D'installation page 15

Fig. 1
PROUD POST: ROUND ACCENT TOP RAIL (ATR)
Step 1: Round ATR Spacers
1. Attach Spacers using provided self-drilling screws with a
5/16" [8mm] nut driver, two screws per spacer. As shown in
Fig. 2.
• The Accent Top Rail Kit comes with 6 spacers in the 69.89"
[1775mm] kit.
• The spacers should be equally spaced along the length of
the rail, with no more then 14" [279.5mm] spacing be-
tween them. As shown in Fig. 1.
• The end spacers should be placed as close to the end brack-
ets as possible.
Note:
• DO NOT REMOVE BACKING OF DOUBLE SIDED TAPE UNTIL
YOU ARE READY TO PERMANENTLY ATTACH THE ATR.
Spacer Attached
Fig. 1
Next To Bracket
PURE VIEW: Al
14" [355.5mm]
Max
HOME GLASS BALUSTER INSTALLATION
13
15