Read Colour Vector (Current Measured Colour Value) - Sensopart FT 50 C S1 Série Instructions De Service Et De Montage

Masquer les pouces

Table des Matières

Les langues disponibles

Reply (byte 3):

decimal 89; hexadecimal 0x59

Intensity channel 1

Colour tolerance channel 1

Intensity tolerance channel 1

Channel 2 to channel 5

The sensor transfers all configuration settings. The coding of the first two status bytes corresponds with that of the

configuration setting (see chapter 8.5.6).

The colour portions and intensity can be values between 0 and 1023. The total of the red, green and blue colour

portions is 1023; i.e. the blue portion which is not sent can be calculated from: 1023 minus green portion minus red

portion.

The colour tolerance can be an absolute value between 0 and 1023 and the intensity tolerance a relative value

between 0 (%) and 100 (%).

Example telegram

(In the example, the sensor has the address 1, the sensor operates as N.O. contact with drop-out delay time, the

keys are locked, channel 1 has the colour vector (red | green |intensity) (120| 240| 411), the colour tolerance 48 and

intensity tolerance 25 (%); the other 4 channels are not listed in detail)

Master telegram

Designation

1st byte

Address

2nd byte

Length

3rd byte

Command

4th byte

Check sum

8.5.9