Possible Configurations And Operating Modes - Sensopart FT 50 C S1 Série Instructions De Service Et De Montage

LED Colour Use
S Yellow S = Scan
 Scan colour
+/F Yellow C+ = Teach+
S+ = Scan+
 teach / scan
further colours
+/F Green F = Functions
flashing (special functions)
Tol. C Green Tol. C
(Tolerance Col.)
Tol. I Red Tol. I
(Tolerance Int.)
Tol. C Red Specific special
Tol. I flashing functions
7.2

Possible configurations and operating modes

Different configurations are possible with the FT 50 C ...S1.
They are divided into 5 main menus.
Possible functions, configurations and operating modes:
Main menu „C" (Colour)
• Teach-in the (individual) colours
Tolerance for colour tone and intensity is set separately.
Main menu „C+" (Colour +)
• Teach-in another colour with a disjunctive link to max. 4 existing
colours.
Tolerance for colour tone and intensity is set separately.
Main menu „S" (Scan)
• Scan a colour spectrum (a colour range)
Main menu „S+" (Scan +)
• Scan, add further colour ranges with a disjunctive link to max. 4
already scanned colour ranges
Main menu „F" (Functions)
• Reset sensor to factory setting.
• Configure drop-out delay time.
• Configure signal mode (N.O. / N.C).
• Configure PIN 8 for key lock or trigger function (lock or triggering via
electrical connection).
40
Display function
In operating mode
No function
No function
No function
No function
No function
No function
FT 50 C...S1 Colour sensor - GB - 068-13821 - 10.10.2011-04
Mounting and
operating instructions
In configuration mode
FLASHES,
if menu „S" (scan a colour) is selected,
FLASHES with „+/F",
if menu „S+" is selected.
FLASHES with „C",
if menu „C+" (teach extra colours) is
selected or with „S",
if menu „S+" (scan extra colours) is
selected.
FLASHES,
if menu „F"
(special functions) selected.
Set colour tolerance (4 levels).
Set intensity (grey levels)
(4 levels).
Special functions are indicated by
special LED combinations.
Factory setting
Neutral White (Kodak 90%)
Neutral White (Kodak 90%)
for all channels
Neutral White (Kodak 90%)
Neutral White (Kodak 90%)
for all channels
-
Drop-out delay time deactivated
Signal mode N.O.
PIN 8 is provided for triggering.