Lock And Unlock Keys; Configure Special Functions (N.o. / N.c. And Drop-Out Delay Time) - Sensopart FT 50 C S1 Série Instructions De Service Et De Montage

Master telegram
Designation
1st byte Address
2nd byte Length
3rd byte
Command
4th byte New address
5th byte Check sum
8.5.5

Lock and unlock keys

Command (byte 3): decimal 86; hexadecimal 0x56
Parameter: bit 0: 0 unlock keys; 1 lock keys
Parameter format: 7 bit data byte
Reply (byte 3): decimal 89; hexadecimal 0x59
Parameter: no
The command locks or unlocks the operating keys (depending on parameter value). The sensor is immediately
locked. It is not necessary to connect PIN 8. It is only possible to unlock the keys again by sending the appropriate
telegram command.
INFORMATION
If the keys are locked via the command, PIN 8 can be used as trigger input.
Example telegram
(In the example the sensor has the address 1 and the keys are locked)
Master telegram
Designation
1st byte Address
2nd byte Length
3rd byte Command
4th byte Locking
5th byte Check sum
8.5.6

Configure special functions (N.O. / N.C. and drop-out delay time)

Command (byte 3): decimal 98; hexadecimal 0x62
Parameter: Bit 0: 1 N.C.
Bit 2: 1 with drop-out delay time
Parameter format: 12 bit data item
Reply (byte 3): decimal 89; hexadecimal 0x59
Parameter: no
The sensor activates the function subject to the parameter value.
52
Decimal Hex.:
129 81
5 05
76 4C
122 7A
50 32
Decimal Hex.:
129 81
5 05
86 56
1 01
83 53
0 N.O.
0 without drop-out delay time
operating instructions
Sensor's reply telegram
Designation
1st byte Address
2nd byte Length
3rd byte
Reply
4th byte Check sum
Sensor's reply telegram
Designation
1st byte Address
2nd byte Length
3rd byte Reply
4th byte Check sum
FT 50 C...S1 Colour sensor - GB - 068-13821 - 10.10.2011-04
Mounting and
Decimal Hex.:
129 81
4 04
89 59
92 5C
Decimal Hex.:
129 81
4 04
89 59
92 5C