LoRaWAN DELTA P - Guide utilisateur / User guide version V1.0.0
1. DEVICE OVERVIEW
Description :
•
The adeunis® LoRaWAN DELTA P is a ready-to-use radio transmitter that measures either a pressure delta between the inside of a
ventilation box and atmospheric pressure or a pressure delta on either side of an element (e.g. filter).
•
The product meets the needs of users who want to remotely monitor a ventilation system.
•
The product sends data at pre-set intervals or when the high or low thresholds are exceeded.
•
The user may access the transmitter configuration locally via a micro-USB port or remotely via the LoRaWAN network, allowing in parti-
cular the setting of the scrutation, transmission modes or alarm thresholds.
•
The product also contains 2 digital inputs/outputs for coupling with newer systems with dry contact outputs and 1 Analog input 0-10 V
for coupling with a 0-10 V sensor (current clamp for example).
•
The LoRaWAN DELTA P is powered by a replaceable internal battery pack.
•
The product is compatible with adeunis®'s KARE Device Management platform.
IMPORTANT NOTE 1: The LoRaWAN DELTA P is delivered by default with an OTAA configuration, so the user can declare the device to a
LoRaWAN operator
Package contents
The device is delivered in a carton package containing the following:
Front panel, rear panel and electronic board, ER18505 battery
2 x CBLZ 3.5x 19mm screws, 2 x SX5 Fischer plugs
1.1. General description
Front side
Cable gland
Right side
Placements for
fixing screws
Magnet slot
for starting the
product
Wire passage pla-
cement for terminal
digital inputs/
block (
outputs
or 0-10V)
Placement of
external tubes for
pressure
Left side
Screw for fixing the
FR
EN
Rear side
base plate
Page
53
of 88