Device Overview; General Description - ADEUNIS Sigfox Smart Building MOTION Guide Utilisateur

Sigfox Smart Building MOTION - Guide utilisateur / User guide version V1.0.1

1. DEVICE OVERVIEW

Description:
• The adeunis® Sigfox Smart Building MOTION device is a ready-to-use radio transmitter for detecting the presence of a heat source and
determining the brightness level in a room.
• This product meets the needs of users to monitor the presence and brightness of their buildings via an LPWAN network.
• The device issues data periodically or when thresholds are high or low.
FR
• The user can access the transmitter configuration locally via a micro-USB port or remotely via the Sigfox network, letting you configure, in
particular, periodicity, sending modes and alarm thresholds.
• The Sigfox Smart Building MOTION is powered by a changeable internal battery.
• It also has a button that send frames when pressed.
• The device is compatible with the adeunis® KARE Device Management platform
EN Package contents
The device is delivered in a carton package containing the following: Front panel, rear panel and electronic board, ER18505 battery
2 x CBLZ 3.5x 19mm screws, 2 x SX5 Fischer plugs

1.1. General description

Opening the caser
Start button and connected but- 2 fixing screw locations
ton (function Digital Input 1)
Physical socket location for terminal block (Digital Input 2)
Page 48 of 83
DISTRIBUTED BY TEXIM EUROPE