Sigfox Network Registers - ADEUNIS Sigfox Smart Building MOTION Guide Utilisateur

Sigfox Smart Building MOTION - Guide utilisateur / User guide version V1.0.1
S390 4 Event counter for the button (Digi-
tal Input1)
S391 4 Event counter for the button (Digi-
tal Input 2)

3.3.2 Sigfox network Registers

The list of registers below allows you to change the network parameters of the device. This list is accessible in PROVIDER mode following
execution of the ATT63 PROVIDER command
These registers must be handled with caution because they could cause problems of communication or of non-compliance with the legislation
in force.
Register Descrip-
tion
Activation of the respect of the duty
S317 1
cycle
Decimal
Decimal
Encoding Encoding
Decimal
DISTRIBUTED BY TEXIM EUROPE
Default: 0
Min/max: 0– 4294967295
Value reset to 0 with a Power-On reset
Default: 0
Min/max: 0– 4294967295
Value reset to 0 with a Power-On reset
Details
Default: 1 (on)
Min/max: 0 (off) à 1 (on)
Unit: none
WARNING :
Deactivation of the duty cycle may result in the use of the
product a non-compliance with the conditions of use of the
frequency band therefore a violation of the regulations in
force.
In the case of Duty Cycle deactivation the responsibility is
transferred to the user
FR
EN
Page 67 of 83