Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LoRaWAN COMFORT CO2 - Guide utilisateur / User guide version V1.1.1
1. DEVICE OVERVIEW
Description :
•
The LoRaWAN COMFORT CO2 from adeunis® is a ready-to-use radio transmitter for measuring ambient temperature, humidity and
carbon dioxide concentration (CO2).
•
This device meets the needs of users to monitor the temperature, the relative humidity and the indoor air quality of their building
through an LPWAN network.
FR
•
The device issues data periodically or when thresholds are high or low.
•
The device include a button that enables to start, to calibrate the CO2 sensor and to detect one or several events (push button) and to
send an associated frame.
•
The device include a digital input to connect a sensor to detect related events (ex: doors opening, water-leak...)
•
A blackout period can be configured to switch off the main functionalities during a period (ex: switch off the T+H+CO2 during night).
•
The user can access the transmitter configuration locally via a micro-USB port or remotely via the LoRaWAN network.
EN
•
The LoRaWAN COMFORT CO2 is powered by a changeable double-pack battery.
•
The device is compatible with the adeunis KARE® Device Management platform and the KARE+ service.
IMPORTANT NOTE: The LoRaWAN Smart Building COMFORT is delivered by default with an OTAA configuration, so the user can declare the
device to a LoRaWAN operator.
To start the LoRaWAN Smart Building COMFORT, use the button on the side of the case or choose PRODUCTION mode in the IoT Configurator.
Package contents
The device is delivered in a carton package containing the following: Front panel, rear panel and electronic card, ER18505-H-2 battery
2 x CBLZ 3.5x 19mm screws, 2 x SX5 Fischer plugs
1.1. General description
LEDs
Start/Connected button
Opening for casing
2 fixing screw locations
Physical socket location
for terminal block
Page
44
of 69
Publicité
Table des Matières
