Device Configuration; Iot Configurator; Advanced Mode; Connecting The Device To A Computer - ADEUNIS ARF8283A Guide Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LoRaWAN DELTA P - Guide utilisateur / User guide version V1.0.0
3.

DEVICE CONFIGURATION

The device configuration using the micro-USB port can now be done in two ways: using the IoT Configurator (application on the user-friendly
interface) or by transmitting AT commands. To open the device casing, refer to section 5.1.
FR
EN

3.2. Advanced Mode

3.2.1 Connecting the device to a computer

Connect the device to a USB input of a computer. The device has a Type B micro USB connector (see section 5.2). When connecting, the device
must be recognized by the computer as a Virtual Com Port (VCP) device.
Using Windows: Verification that the device has been recognised to be functioning properly can be obtained by viewing the device manager. You
should see the USB series device with a corresponding COM port number appear during connection.
If you are not able to see a device of this type, you must install the USB driver for this device, available to download from our website:
www.adeunis.com/download/
Select:
USB-STM32_x64 driver, if your computer is a 64-bit system
USB-STM32 driver, if your computer is a 32-bit system

3.1. Iot Configurator

IoT Configurator is an adeunis® application developed to facilitate the configuration of devices
through a user-friendly interface The IoT Configurator can be used directly on a mobile or tablet
in Android or via a Windows PC.
Compatible with Windows 10 only and Android 5.0.0 Minimum
Connect via the micro-USB interface (see section 5.2) present on the device the PC or the mobile.
The application automatically recognizes the device, downloads these configuration parameters
and makes it possible to configure the device quickly and intuitively using the forms (drop-down
menus, checkboxes, text fields, etc.). The application also lets you export an application configu-
ration in order to duplicate it on other devices in a few clicks.
The IoT Configurator is continuously enriched with new features.
For mobile or tablet:
Download application for free on Google Play
https://play.google.com/store/apps/details?id=com.adeunis.IoTConfiguratorApp
For computer: directly on the Adeunis website
https://www.adeunis.com/download/
https://
Page
66
of 88

Publicité

Table des Matières
loading

Table des Matières