Start Screen; Preset Therapy Mode; Changing Settings; Setting The Therapy Mode - L&R Suprasorb CNP P3 Mode D'emploi

4.3 Start screen

The start screen appears
for a few seconds when
the unit is switched on.

4.5 Changing settings

The screen of the Suprasorb
a touchscreen. The following changes can be
made here by simply touching the symbols in
the two toolbars (see red marking in image of
screens at end of Section 4.5):
Start of therapy
The therapy mode must
only be set by qualified
healthcare professionals!
General settings
Locking function

4.4 Preset therapy mode

4.6 Setting the therapy mode

CNP P3 is
®
The preset therapy mode
appears after the start
screen; the therapy
is stopped.
Selecting
to the following screen:
You can cancel the
action by pressing
or confirm your selection
by holding
3 seconds to proceed to
the therapy settings menu.
Choose one of the two
therapy modes by selecting
the corresponding view –
Continuous or Intermittent –
using
are set in intervals of 5
for the pressure and
30 seconds for the time.
takes you
down for
. The values