L&R Suprasorb CNP P3 Mode D'emploi page 129

Proceed as follows:
1. Remove the exudate pouch from the packaging and extend completely.
4. The connection to the wound drainage system can now be established on the exudate
pouch tube. This can be done using either the Suprasorb
Suprasorb CNP Deep Drain, each with the corresponding connector.
®
See also instructions for use for Suprasorb
the application instructions.
2. Insert the exudate pouch loosely into
the reusable container. During insertion,
ensure that the pouch film is inserted
into the container completely and
is not trapped at the edges.
3. Now promptly affix the container system
(Suprasorb CNP Container with inserted
®
Suprasorb CNP Exudate Pouch) to the
®
main unit and as shown in the diagram
until it clicks into place completely and
is securely connected.
CNP Drainage Pad or the
®
CNP Drainage Pad; points f, g and h of
®
129