Care And Maintenance; Maintenance And Inspection - Invacare Matrx MX2 Back Manuel D'utilisation

5.0 C
ARE AND
5.1 Care and Laundering:
IMPORTANT! All cleaning agents and disinfectants used must be effective,
compatible with one another and must protect the materials they are used
to clean.
CAUTION! Risk of Product Damage
DO NOT use cleaning agents containing bleach, phenols or alcohols.
General Care and Cleaning:
The cover may be easily wiped down with a damp cloth when necessary.
Laundering Directions (Outer Cover):
1. Carefully remove the cover by releasing the velcro hook & loop fasteners
along the top & bottom edge and inside of the back shell.
NOTE: Before laundering, the inner foam cushion must be removed.
2. Machine wash at 60°C using the delicate cycle (see Instructions on label).
IMPORTANT! Washing at higher temperatures may cause shrinkage
3. Hang cover to drip dry in a clean indoor environment;
or
Tumble dry on a low heat setting.
IMPORTANT!
– Tumble dry setting must not exceed 40°C
– Do Not tumble dry for longer than 10 minutes
– Dry thoroughly before re-fitting to the foam
– Do Not Iron
– Do Not Dry Clean

5.2 Maintenance and Inspection:

Monthly: Perform a visual inspection of parts including hardware, brackets,
upholstery materials, foams, and plastics for deformation, corrosion, breakage,
wear or compression.
WARNING! Risk of Injury or Damage
Inspect ALL fasteners weekly to ensure that mechanical connections and
attaching hardware are tightened securely.
DO NOT continue to use this product if problems are discovered. Corrective
measures can be performed at, or arranged through your equipment supplier.
M
AINTENANCE