MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
1) REMOVE POWER FROM THE POWER SUPPLY
TERMINALS AND FROM RELAY OUTPUT
TERMINALS
2) Remove the instrument from case.
3) Using a vacuum cleaner or a compressed air jet
(max. 3 kg/cm
) remove all deposit of dust and
2
dirt which may be present on the louvers and on
the internal circuits trying to be careful for not
damage the electronic components.
4) To clean external plastic or rubber parts use
only a cloth moistened with:
- Ethyl Alcohol (pure or denatured) [C
- Isopropil Alcohol (pure or denatured)
[(CH
)
CHOH] or
3
2
- Water (H
O)
2
5) Verify that there are no loose terminals.
6) Before re-inserting the instrument in its case,
be sure that it is perfectly dry.
7) re-insert the instrument and turn it ON.
lxs-1-0f.pmd
19
H
OH] or
2
5
GB
GB
GB
GB
GB
19
16/01/2004, 9.29