Siemens SINUMERIK 840Di sl Manuel De Mise En Service page 319

$MM_MD_TEXT_SWITCH=0
$MM_ACTION_LOG_MODE = 0xFE
$MM_PROGRAM_SETTINGS = 0
$MM_SW_OPTIONS = 0
$MM_HMI_TESTAUTOMAT_OPTION = 0
$MM_HMI_WIZARD_OPTION = 0
$MM_TRACE=0
Le réglage de l'enregistreur d'activité peut aussi s'effectuer via l'interface utilisateur de l'IHM,
dans le groupe fonctionnel "Mise en service" → "IHM" → "Réglages système" :
; ActionLog (Enregistreur d'activité) parameters
[ActionLog]
; CommitLatency tells how many seconds after creation an ActionLog
; record is written to disk at latest. If this value is less than 0
there is no
; time controlled automatic writing to disk at all
; Default : CommitLatency = -1
; no automatic writing
CommitLatency = -1
; DirectoryPath specifies the directory of the logfiles
DirectoryPath = D:\AC_LOG
; FileSize gives the upper limit of logfile size in bytes
FileSize = 40000
; VariableN allows monitoring of max 10 NC/PLC variables. The first
; parameter is numericand provides the monitoring mode:
; if Bit0 is set and the value of the variable changes, the value
changes
; are protocolled in the ActionLog files
; if Bit1 is set and the value of the variable changes, the
ActionLog files
; are commited to disk
; Default : Variable0 = 1, /Channel/ProgramInfo/msg
; monitor part program messages
Variable0 = 1, /Channel/ProgramInfo/msg
; CommittedAlarms holds up to 10 comma separated alarm numbers.
; Changes of these alarms commit
; ActionLog data to disk
; Default : CommittedAlarms = 3000
; commit on emergency stop
CommittedAlarms = 3000
; for working with SIMNC uncomment the following section descriptor
; by this way a sim-process will be started to be used as a machine
;[NCDDE_STARTCMD]
CMD=dpncsim.exe /T:1 /P:0
WND_CLASS=SIM_LOCAL_NCK
WND_NAME=SIM_LOCAL_NCK
STARTUP_TIMEOUT=50
HMI-Advanced (IM4)
Manuel de mise en service, 03/2009, 6FC5397-0DP10-3DA0
Liste des fichiers INI
A.17 MMC.INI
313