Declaration Of Incorporation - Interpump Group Sws71 Manuel D'utilisation Et D'entretien

17

DECLARATION OF INCORPORATION

The manufacturer INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 - 42049 - S. ILARIO D'ENZA (RE) - Italy DECLARES under
its sole responsibility that the product identified and described as follows:
Designation: Pump
Type: Reciprocating plunger pump for high pressure water
Trademark: INTERPUMP GROUP
Model: SS7193 – SS71106 – SS71153 – SS71170 – SS71170-F – SN71106-F – SN71153-F
SN71170-F – SN7193 – SN71106 – SN71153 – SN71170 – SW71170 – SWS71170
Is found to comply with the Machinery Directive
2006/42/EC Standards applied: UNI EN ISO 12100 - UNI EN
809
The pump identified above meets the following essential safety and health protection requirements as listed in section 1 of
Annex I of the Machinery Directive:
1.1.1 - 1.1.2 – 1.1.3 – 1.1.5 – 1.1.6 - 1.3.1 – 1.3.2 – 1.3.3 – 1.3.4 – 1.5.4 – 1.6.1 – 1.7.1 – 1.7.2 – 1.7.4 – 1.7.4.1 – 1.7.4.2 and the
relevant technical documentation has been compiled in accordance with Annex VII B.
In addition, following a motivated request, the manufacturer undertakes to provide a copy of the relevant pump
technical documentation in the manner and terms to be defined.
The pump must not be commissioned until the plant in which it is to be incorporated has been declared to be in compliance
with the provisions of the relevant directives and/or standards.
The technical file is constituted by INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 - 42049 - S. ILARIO D'ENZA (RE) -
Italy, in its capacity as legal entity.
Person authorized to draw up the declaration:
Reggio Emilia – 07/2024
DECLARATION OF
INCORPORATION
(In accordance with Annex II of European Directive
2006/42/EC)
Giacomo Leo (Lawyer)
35