Interpump Group Pratissoli KT Serie Manuel D'utilisation Et D'entretien page 37

18 DECLARATION OF INCORPORATION
The manufacturer INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 - 42049 - S. ILARIO D'ENZA - Italy DECLARES that the product
identified and described as follows:
Designation: Pump
Type: Reciprocating plunger pump for high pressure water
Trademark: INTERPUMP GROUP
Model: KT16 - KT19 - KT20 - KT22 - W525 - W531 series
Is found to comply with the Machinery Directive 2006/42/EC
Standards applied: UNI EN ISO 12100:2010 - UNI EN 809:2000
The pump identified above meets all the essential safety and health protection requirements as listed in section 1 of Annex I of
the Machinery Directive:
1.1.1 – 1.1.2 – 1.1.3 – 1.1.5 – 1.1.6 - 1.3.1 – 1.3.2 – 1.3.3 – 1.3.4 – 1.5.4 – 1.5.5 – 1.6.1 – 1.7.1 – 1.7.2 – 1.7.4 – 1.7.4.1 – 1.7.4.2 and the
relevant technical documentation has been compiled in accordance with Annex VII B.
In addition, following a motivated request the manufacturer undertakes to provide a copy of the relevant pump technical
documentation in the manner and terms to be defined.
The pump should not be put into service until the plant to which the pump is to be incorporated has been declared in
accordance with the provisions of the relevant directives and/or standards.
Person authorized to compile the technical file
The manager:
Reggio Emilia - January 2017
DECLARATION OF INCORPORATION
(In accordance with Annex II of European Directive 2006/42/EC)
Name: Maurizio Novelli
Address: INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 -
42049 - S. ILARIO D'ENZA (RE) - Italy
37