Safety Information; Meaning Of The Safety Information; Pictograms And Symbols - Parkside Part 20-Li A1 Traduction Des Instructions D'origine

GB MT

Safety information

CAUTION! The following ba-
sic safety precautions must
be observed while using
electrical devices to protect
against electric shock, injury
and risk of fire.
WARNING! Injury and property
damage due to improper handling of
battery. Observe the safety informa-
tion and notes on charging and prop-
er use as shown in the instruction
manual for your battery and charger
from the series X 20 V TEAM. A de-
tailed description of the charging pro-
cess and further information can be
found in these separate operating in-
structions.
Meaning of the safety
information
DANGER! If you do not observe
this safety instruction, an accident will
occur. The result of which is severe
bodily injury or death.
WARNING! If you do not observe
this safety instruction, an accident
may occur. The result of which is
likely severe bodily injury or death.
CAUTION! If you do not observe
this safety instruction, an accident
will occur. The result of which is likely
minor or moderate bodily injury.
NOTICE! If you do not observe this
safety instruction, an accident will oc-
cur. The result of which is possible
damage to property.
24

Pictograms and symbols

Symbols on the device
The device is part of the
X 20 V TEAM series and can be
operated with batteries of the
X 20 V TEAM series. Batteries of
the X 20 V TEAM series may only
be charged using chargers of the
X 20 V TEAM series.
Attention!
Read the instruction manual
Waste electrical and electron-
ic equipment (WEEE) must not
be disposed of with domestic
waste.
Cutting circle
240 mm
Danger of electric shock!
Keep other people
away. You could be in-
jured by ejected foreign
bodies.
The cutting unit will
keep rotating for a few
seconds after the device
has been switched off.
Keep hands and feet at
a safe distance.
Use hearing protection/Use
eye protection
Use of the device in the rain or
a damp environment is prohib-
ited.
The use of blades is prohibited.
Remove the battery before
maintenance work.