Residual Risks - Parkside Part 20-Li A1 Traduction Des Instructions D'origine

GB MT
• Avoid an abnormal body posture.
Ensure secure footing at all times
to maintain balance when working
on slopes.
• Go slowly. Do not walk with the
device in your hand.
• Keep the connection and/or exten-
sion cable away from dangerous
moving parts in order to prevent
damage to cables that could lead
to contact with live parts.
• Make sure to keep the ventilation
openings free of foreign objects.
• Switch off the device and remove
the battery. Make sure that all
moving parts have come to a com-
plete stop
• when leaving the device,
• before removing obstructions or
loosening blockages,
• before checking the device,
cleaning it or performing main-
tenance work on it.
• After contact with a foreign ob-
ject,
• if the machine begins to vibrate
in an unusual way.
• If the device starts to vibrate ab-
normally, an immediate check is
required, remove the battery and:
• examine for loose parts and
tighten these,
• search for signs of damage,
• replace damaged parts. contact
the service centre.
• If an accident or malfunction oc-
curs during operation, switch off
the device immediately. Injur-
ies must be properly treated or
medical assistance sought. Read
the "Troubleshooting" section to
correct any malfunctions or con-
tact our Service Centre.
• Only use accessories recom-
mended by PARKSIDE. Unsuit-
26
able accessories may cause elec-
tric shock or fire.
Cleaning, maintenance and storage
• Switch off the drive and remove
the battery. Wait until all moving
parts have stopped and allow the
device to cool down when the
device is stopped for maintenance,
repair, storage or replacement of
an accessory.
• Replace worn or damaged parts in
the interests of safety. Use only ori-
ginal spare parts and accessories.
Using externally produced parts
results in the immediate loss of any
warranty claim.
• Check and maintain the machine
regularly. Only have the machine
repaired at an authorised work-
shop.
• Store the device out of reach of
children.

Residual risks

There will always be residual risks
even if you operate this device ac-
cording to the instructions. The fol-
lowing hazards may occur in connec-
tion with the type and design of this
device:
• Eye damage if no suitable eye pro-
tection is worn.
• Hearing damage if suitable ear pro-
tection is not worn.
• Health injuries resulting from the
effect of hand/arm vibration in the
event that the tool is used over a
longer period of time or is not used
and maintained properly.
• Cutting injuries
WARNING! Danger due to elec-
tromagnetic field generated while the
tool is in operation. Under certain cir-
cumstances, this field may negat-
ively affect active or passive med-
ical implants. In order to reduce the