Publicité
Commissioning
Start process: Lift ...
Only devices with motor lift: In this menu, define the behavior of the flask lift at the start of the
process.
➜
Touch the function button to switch between the two options:
–
[Start process: Lift on]: With this selection, the flask lift automatically moves to
the lower end position when starting the process and the evaporation flask is thus
automatically immersed in the heating bath.
–
[Start process: Lift off]: With this selection, the flask lift remains in the upper end
position on starting the process; the evaporation flask must be immersed in the
heating bath manually.
➜
Confirm your entry with [OK] to accept the selection.
Deactivate this function when using a foam brake and on devices using a
large evaporation flask to prevent damage to the flask!
Stop process: Heating bath ...
In this menu, define the behavior of the heating bath heating at the end of the process.
➜
Touch the function button to switch between the two options:
–
[Stop process: Heating bath on]: With this selection, the heating bath remains
switched on after the end of the process.
–
[Stop process: Heating bath off]: With this selection, the heating bath is automatically
switched off at the end of the process.
➜
Confirm your entry with [OK] to accept the selection.
Stop process: Chiller ...
In this menu, define the behavior of the chiller at the end of the process.
➜
Touch the function button to switch between the two options:
–
[Stop process: Chiller on]: With this selection, the chiller remains switched on at the
end of the process.
–
[Stop process: Chiller off]: With this selection, the chiller is automatically switched off
at the end of the process.
➜
Confirm your entry with [OK] to accept the selection.
Factory settings
In this menu, reset the device to the factory settings. All user data (parameter adjustments,
favorites, ramp profiles) will be deleted!
➜
Touch the function button [Factory settings]. The
following prompt appears on the display:
➜
Confirm the confirmation prompt with [OK] to reset
the device to the factory settings. The device must be
restarted!
➜
To cancel the reset and return to the previous menu
without making any changes, touch the [Cancel]
button.
91
Publicité
