Publicité
Commissioning
Set system time manually
➜
Deselect the option [NTP server] in the
[Hei-CONTROL Pro] menu to set the system time
manually.
➜
Confirm with [OK] to exit the menu
[Hei-CONTROL Pro] and open the start window
using the Home button.
➜
If necessary, switch to the display mode [System
time], see „System time/timer/stopwatch selection"
on page 84.
➜
Touch the function button [System time] for about
two seconds to open the dialog box and set the
system time manually.
➜
Touch the function button [Date/1] and use the
keyboard to enter the current date.
➜
Touch the function button [Time zone/2] and select
your time zone:
–
In a first step, touch the [Country] field and
select the country of use from the following list.
–
Then, touch the [Time zone] field to define a
specific time zone within the country of use, if
necessary.
–
Confirm the new setting with [OK].
➜
Touch the function button [Time/3] and use the
keyboard to enter the current time.
➜
Confirm the new setting with [OK].
Program timer
➜
Switch to the display mode [Timer], see „System time/timer/stopwatch selection" on page
84.
➜
Touch the function button [System time] for approx. two seconds to open the keyboard and
to program the timer.
–
Adjustment range: 00:00:01 to 99:9:9 in [hh:mm:ss], respectively one second to
four days, three hours, nine minutes and nine seconds
85
Publicité
