Everglades EV 215 Manuel D'instructions page 52

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
START / STOP
For starting and stopping the selected baking program.
To start a program, press the "START / STOP" button once. A short beep will be heard and the two dots on
the time display begin to flash and the Indicating light lights up, the program starts. Any other button is
deactivated except the "START / STOP" button after a program has begun.
To stop the program, press the "START / STOP" button for approx. 3 seconds until a beep confirms that the
program has been switched off. This feature will help prevent any unintentional disruption to the operation
of program.
MENU
It is used to set different programs. Each time it is pressed (accompanied by a short beep) the program will
vary. Press the button continuously the 2 programs will be shown in cycle on the LCD display. Select your
desired program. The functions of 2 programs will be explained as below.
. Basic: kneading, rising and baking normal bread. You may also add ingredients to add flavor.
2. french: kneading, rising and baking with a longer rising time. The bread baked in this program usually
will have a crisper crust and light texture.
3. Whole wheat: kneading, rising and baking of whole wheat bread. This setting has longer preheat time
to allow the grain to soak up the water and expand. It is not advised to use the delay function as this can
produce poor results.
4. Quick: kneading, rising and baking loaf with baking soda or baking powder. Bread baked with this
setting is usually smaller with a dense texture.
5. Sweet: kneading, rising and baking the sweat bread. For baking the crisp and sweet bread.
6. Ultra fast-I: kneading, rising and baking .5LB loaf in a shortest time. Usually the bread made in this
program is smaller and rougher than that made with Quick program.
7. Ultra fast-II: the same as above, but applicable for 2.0LB loaf.
8. dough: kneading and rising, but without baking. Remove the dough and shape it to make bread rolls,
pizza and steamed bread, etc.
9. Jam: boiling jams and marmalades.
0. Cake: kneading, rising and baking; rising with soda or baking powder.
. Sandwich: kneading, rising and baking sandwich. For baking light texture bread with a thinner crust.
2. Bake: only baking, no kneading and rising; also used to increase the baking time on selected settings
COLOR
With the button you can select a LIGHT, MEdIUM or dARK color for the crust. Press this button to select
your desired color.
LOAf SIZE
Press this button to select the Loaf size of the bread. Please note that the total operation time may vary
with the different loaf size.
dELAY (
TIME + OR
If you want the appliance to stop working immediately you can use this button to set the delay time.
You must decide how long it will be before your bread is ready by pressing the " "or " ". Please note the
delay time should include the baking time of program. That is, at the completion of delay time, there is hot
bread which can be serviced. At first the program and degree of browning must be selected, and then press
" "or " " to increase or decrease the delay time at the increment of 0 minutes. The maximum delay is 3
hours.
Example: Now it is 8:30p.m, if you would like your bread to be ready in the next morning at 7 o'clock, i.e. in
0 hours and 30 minutes, select your menu, color, loaf size and then press the " " or " " to add the time
until 0:30 appears on the LCd. Then press the STOP / START button to activate this delay program. You
TIME -)
52

Publicité

Table des Matières
loading

Table des Matières