Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Warranty

Warranty
1. You may only assert warranty claims within a period of
max. 2 years as of the purchase date. Our warranty is
limited to the elimination of material and fabrication
defects, or the replacement of the machine. Realisation
occurs according to our choice through repair to the
machine. Our warranty is free of charge.
The malfunction and its causes are always examined by
our customer service and includes:
• Spare parts delivery for the repair work within the scope
of the warranty
• Repair or replacement of the defective component
(Replaced spare parts will be passed to our possession.)
2. For eligible warranty claims, the costs for shipping and the
costs for disassembly and installation will be charged at
our expense. Warranty claims must be verifi ed by submit-
ting the purchase receipt.
3. The buyer agrees to use the purchased machine for no
other purpose than as designated in the operating inst-
ructions.
4. The warranty expires if the machine is modifi ed by third
parties, or changed by installing outside parts, or defects
that occurred in initial conjunction with the change.
Further, the warranty claim also expires if the regulations
regarding the management of the machine were not
observed.
5. Not included in the warranty:
• Expendable items not associated with repair work on
recognised malfunctions.
• All maintenance work or other work that developed due
to wear, accident or operating conditions as well as use
with disregard to the manufacturers' specifi cations.
• All events, such as noise development, vibrations, wear,
etc. that do not affect the machine qualities.
• Damage caused by:
– installing parts by third parties or the efforts of the
user to remedy the damage himself.
– not using original spare parts
– damage caused by lack of care, unsuitable care pro-
ducts, etc.
REX_Trainer_RX600G_13.indd GB-41
REX_Trainer_RX600G_13.indd GB-41
• Components subject to wear or use (except clear mate-
rial or manufacturer defects), such as: – Bearings
– Lamps – Stickers – Belts – Batteries, etc.
Costs for maintenance, inspection and cleaning work.
6. Warranty claims only authorize the customer to demand
the elimination of the defect. Claims for return or reduc-
tion of the purchase price only apply after subsequent
improvement fails.
7. The examination and decision about a warranty claim is
incumbent upon the manufacturer.
8. The replacement of direct or indirect damage will not be
granted.
9. Warranty claims will only be considered if lodged with
SI-Zweirad-Service-GmbH directly after fi nding the de-
fect.
10. An executed warranty will neither renew nor extend the
period of warranty. Asserting warranty claims after the
period of warranty has expired is precluded.
11. Arrangements other than the above-mentioned only
then apply if they are confi rmed by the manufacturer in
writing.
12. If your machine sustained damage during the delivery,
please record all damage on the delivery note. Have the
supplier (market, carrier) sign the damage report and
then contact us immediately.
13. Should you have a technical problem with the machine
you have acquired, our customer service staff are avai-
lable:
D
SI-Zweirad-Service GmbH
Phone: 0 52 42 41 08 98 24
Lindenstraße 50
Fax:
33378 Rheda-Wiedenbrück E-Mail: si-service@prophete.net
Germany
AT
CH
SI-Zweirad-Service GmbH
Phone: + 49 52 42 41 08 98 24
Lindenstraße 50
Fax:
33378 Rheda-Wiedenbrück E-Mail: si-service@prophete.net
Germany
0 52 42/41 08 72
www.rex-sport.de
+ 49 52 42 41 08 72
www.rex-sport.de
GB-41
21.05.13 10:46
21.05.13 10:46

Publicité

Table des Matières
loading

Table des Matières