Adjusting The Headrest - lopital Reflex Mode D'emploi

Adjusting the headrest

• The Reflex is fitted with a height-
adjustable headrest that can be
operated with a rotary knob that is
placed on the back and on the top.
• Unscrew the knob and move the
headrest up or down. When the cor-
rect height has been reached, tighten
the knob.
• Completely removing the knob allows
you to remove the headrest. The
depth can be adjusted by 7 cm and is
adjusted by unscrewing the top.
• The Reflex has a bowl-shaped
headrest, which means that the user's
head is supported optimally, also at
the side.
Using a bedpan / pail
• When the Reflex is used as a toilet
chair, a bedpan or toilet pail can be
slid into the special guide under the
seat.
• The bedpan or toilet pail is slid in
from the back of the seat. In order to
prevent injury to the user, we recom-
mend that the carer place the bedpan
or toilet pail before the user is seated.
In order to avoid injury to the user,
we recommend that the carer remo-
vse the cover from the seat and put
the bedpan or pail in position before
the user sits down.
Mobile shower seat 'Reflex' | Instructions for use | 25