Working With The Flexo - lopital Flexo Mode D'emploi

2.2. Working with the Flexo

Step 1
Fold the armrests up or turn the front closure downwards
(See paragraph 3.3 Armrest with front closure) .
Step 2
If necessary, fold the foot plates up or turn the footrests away
(See paragraph 3.2 Footrests) .
Step 3
The Flexo must be put on the brakes before transferring persons
(See paragraph 3.1. Wheel blocking) .
Step 4
The client can take a seat in the chair . Support the client if necessary
Step 5
Place both feet on the footrests and calves against the calf-supports
(See paragraph 3.2 Footrests) .
Step 6
Close the armrests once the client has taken a seat in the chair
(See paragraph 3.3 Armrest with front closure) .
Step 7
Notify the client about the processes you will be carrying out .
Step 8
Take the chair off the brake when you wish to move it
(See paragraph 3.1. Wheel blocking). Always move the chair in the low position.
Step 9
When you wish to move the chair upwards / downwards, you must apply the brake
(See paragraph 3.4. Moving upwards / downwards) .
24 | Instructions for use | Flexo Shower-toilet chair