Working With The Mylo - lopital Mylo Mode D'emploi

2.2. Working with the Mylo

Step 1
If necessary, place the seat once again on the chair and / or fold the seat downwards.
Step 2
If necessary, fold the armrests up (See paragraph 3.3. Armrests).
Step 3
If necessary, fold the foot plates up and fold the footrest frame up too (See paragraph
3.2. Footrests).
Step 4
The Mylo must be put on the brakes before transferring persons (See paragraph
3.1. Wheel blocking).
Step 5
The client can take a seat in the chair. Support the client if necessary.
Step 6
Place both feet on the footrests (See paragraph 3.2. Footrests).
Step 7
Close the armrests once the client has taken a seat in the chair (See paragraph
3.3. Armrests).
Step 8
Notify the client about the processes you will be carrying out.
Step 9
Take the chair off the brake when you wish to move it (See paragraph 3.1.
Wheel blocking).
22 | Instructions for use | Mylo Shower-toilet chair