Working With The Flexo - lopital Flexo 5100 Mode D'emploi

2.2. Working with the Flexo

Step 1
Fold the armrests up or turn the front closure downwards (See paragraph 3.3. Armrests
with front closure).
Step 2
If necessary, fold the footrests up or turn the footrests away (See paragraph 3.2.
Footrests).
Step 3
The Flexo must be put on the brakes before transferring persons (See paragraph 3.1.
Wheel blocking).
Step 4
The client can take a seat in the chair. Support the client if necessary.
Step 5
Place both feet on the footrests and calves against the calf-support (See paragraph 3.2.
Footrests).
Step 6
Close the armrests once the client has taken a seat in the chair (See paragraph 3.3.
Armrests with front closure).
Step 7
Notify the client about the processes you will be carrying out.
Step 8
Take the chair off the brake when you wish to move it (See paragraph 3.1. Wheel blocking).
Always move the chair in the low position.
Step 9
When you wish to move the chair upwards / downwards, you must apply the brake
(See paragraph 3.4. Moving upwards / downwards).
24 | Instructions for use | Flexo Shower-toilet chair